Công ty TNHH kỹ thuật công nghệ và dịch vụ Tiên Phong
AccuRef20 Silver/Silver Chloride Permanent
Electrode Splice-able
• All hardware components included for onsite cable splicing (silicone sealant & PVC cement to be supplied by customer)
• Any customer-supplied cable can be used having a maximum outside diameter of 0.4 inch (10mm) and a maximum wire size of # 8 AWG (10mm2)
• Moisture absorbent ceramic tip has a large electrical contact area of approximately 16.4 sq. inches (approx. 100cm2)
• Electrode has a 2.77” diameter (6.9cm) at its maximum, is 15” long (37cm) and weighs 3.9lbs (1.77kg)
Important Notes:
1) These products must be installed according to the installation instructions provided
2) These products are not guaranteed to maintain their calibration in all soil environments and it is incumbent on the customer to test their soil for the presence of any potential chemical contaminants prior to installation of these products. The M. C. Miller Company has not tested these products with regard to the effects of specific (potential) chemical contaminants on their calibration.
3) These products are not designed for submersion applications.
“A Guide to Understanding Reference Electrode Readings”, (Materials Performance, September 2009 issue)
• All hardware components included for onsite cable splicing (silicone sealant & PVC cement to be supplied by customer)
• Any customer-supplied cable can be used having a maximum outside diameter of 0.4 inch (10mm) and a maximum wire size of # 8 AWG (10mm2)
• Moisture absorbent ceramic tip has a large electrical contact area of approximately 16.4 sq. inches (approx. 100cm2)
• Electrode has a 2.77” diameter (6.9cm) at its maximum, is 15” long (37cm) and weighs 3.9lbs (1.77kg)
Important Notes:
1) These products must be installed according to the installation instructions provided
2) These products are not guaranteed to maintain their calibration in all soil environments and it is incumbent on the customer to test their soil for the presence of any potential chemical contaminants prior to installation of these products. The M. C. Miller Company has not tested these products with regard to the effects of specific (potential) chemical contaminants on their calibration.
3) These products are not designed for submersion applications.
“A Guide to Understanding Reference Electrode Readings”, (Materials Performance, September 2009 issue)
• Any customer-supplied cable can be used having a maximum outside diameter of 0.4 inch (10mm) and a maximum wire size of # 8 AWG (10mm2)
• Moisture absorbent ceramic tip has a large electrical contact area of approximately 16.4 sq. inches (approx. 100cm2)
• Electrode has a 2.77” diameter (6.9cm) at its maximum, is 15” long (37cm) and weighs 3.9lbs (1.77kg)
Important Notes:
1) These products must be installed according to the installation instructions provided
2) These products are not guaranteed to maintain their calibration in all soil environments and it is incumbent on the customer to test their soil for the presence of any potential chemical contaminants prior to installation of these products. The M. C. Miller Company has not tested these products with regard to the effects of specific (potential) chemical contaminants on their calibration.
3) These products are not designed for submersion applications.
“A Guide to Understanding Reference Electrode Readings”, (Materials Performance, September 2009 issue)
Không có nhận xét nào:
Đăng nhận xét